Honeywell RTH2310 Manual


Honeywell RTH2310 Manual
Read and save these Honeywell RTH2310 Manual instructions. Your new Honeywell thermostat has been designed to give you many years of reliable service and easy to use push-button climate control. Features; Backlit display is easy to read. It shows the room temperature (measured) at all times. One-touch access to the set temperature. The configuration of energy saving for maximum cost savings. Schedules of week/weekend separate programmable (5 + 2-day program). Temporary and permanent override of schedule. Early Start ensures the temperature right at the right time. Built-in compressor protection. Early Start allows the thermostat to "learn" how long your furnace or air conditioner takes to reach the set temperature. Simply set the desired time and temperature desired in programming. The thermostat will determine when to activate heating or cooling so that the desired temperature at the desired time.

Your thermostat has a feature that helps prevent damage to the compressor of your air conditioning. Since the compressor is restarted too soon after turn off, this can force the compressor to wait 5 minutes before restarting. During the wait time, it flashes on the screen. When the safe wait time has elapsed, the icon stops flashing and turns on the compressor. When you put the thermostat in the cooling mode, you might have to wait up to five minutes before you start the cooling. This is a feature of safety for the compressor. It will blink on the screen until it starts cooling. The thermostat automatically adjusts its slogan of temperature according to the programmed schedule. You can program up to 4 periods per day, with different settings for weekdays and weekends. For example, you can set the four periods for days of the week, but only two periods (wake and sleep) for the weekends. To program a period, you must set its start time and its two temperature settings (one when the thermostat is in) Cooling mode and another when it is in heating mode).

Your thermostat has a feature that helps prevent damage to the compressor of your air conditioning. Since the compressor is restarted too soon after turn off, this can force the compressor to wait 5 minutes before restarting. During the wait time, it flashes on the screen. When the safe wait time has elapsed, the icon stops flashing and turns on the compressor. When you put the thermostat in the cooling mode, you might have to wait up to five minutes before you start the cooling. This is a feature of safety for the compressor. It will blink on the screen until it starts cooling. The thermostat automatically adjusts its slogan of temperature according to the programmed schedule. You can program up to 4 periods per day, with different settings for weekdays and weekends. For example, you can set the four periods for days of the week, but only two periods (wake and sleep) for the weekends. To program a period, you must set its start time and its two temperature settings (one when the thermostat is in) Cooling mode and another when it is in heating mode).

0 Response to "Honeywell RTH2310 Manual"